Carbest 47820 Benutzerhandbuch Seite 27

How to adjust the guide line
According to the site of standard reference line, you can put references such as desks in the back side of the car.
Compared with the marked references, you can adjust the sites and angles of two guide lines displayed on the monitor.
You will get the accurate and safety guide lines once it coincides with the references.
Press setting button to enter "guide line adjustment" mode. The system is defaulted to adjust left guide line first.
Press the button again to switch to adjust the right guide line.
The up down , left
clockwise rotation and contra rotating
and calibrate. Calibration finished, switch the reverse gear to save the information.
Caution: keep the remote control 0.5 m - 1.0 m from rearview mirror when you use the remote to adjust the
parking lines.
L R
Display on the monitor
47820_Bedienungsanleitung_Spiegel_EN.indd 27
and right buttons are to adjust the corresponding location of guide lines. The
buttons are to adjust the angles of guide lines. It is easy to operate
Right position
Wrong position
Press the button to choose the L or R
adjustable guideline.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Left
Down
Move the
Remote control
guide line
27
47820/47821
Clockwise
UP
Right
anticlockwise
Rotate the
guide line
11.12.18 18:17