OJ Electronics OJ-AIR2-HMI-35T Anleitung Seite 4

OJ-HMI English
shown to the right of the house is the temperature setpoint. The
icons shown in the lower part of the screen can be changed and
may therefore differ from those shown in these instructions.
FAN SPEED
To set fan speed, press the fan in
the lower part of the home screen.
You can choose between five
predefined fan speeds. Off, Auto,
Low, High and Service Stop. If you
choose Auto, OJ-AIR2-HMI-35T
will follow a predefined program.
If you choose Low, the prede-
fined program is overridden and
the fan operates at low speed. If
you choose High, the predefined
program is overridden and the
fan operates at high speed. If you
choose Off, the fan comes to a
complete standstill until fan speed
is again changed. If you choose
Service Stop, the system shuts down and can only be restarted
locally from the control panel.
TEMPERATURE
To change the temperature
setpoint for the selected control
mode, press the temperature on
the panel's home screen. Change
the temperature using the arrows
and confirm with the green button.
4
© 2020 OJ Electronics A/S