Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
4. NEVER steer the scooter with one hand, but always with both hands.
You have to grip the handlebar firmly, with both hands.
5. Do NOT exercise any sharp or short turning manoeuvres when you
ride the scooter. Do NOT lean the upper part of the body on the
handlebar when you turn, since the handlebar of the scooter bends
and can thus lead to a loss of control.
6. Do NOT ride the scooter on slippery or wet surfaces, because the
PU wheels slip and you can loose control of the scooter. Avoid
streets and surfaces with water, sand, gravel, dirt, leaves and other
debris. Wet weather impairs traction, braking and visibility.
7. Do NOT use the scooter on steep slopes, as the device may be
damaged or a brake failure can occur. The riders need to be careful
on such routes. Avoid excessive speeds that for example can be
achieved when driving downhill.
8. Avoid strong bumps, drain grating and sudden changes of the
riding surface. The scooter could stop abruptly.
9. Activate the brake pedal to ensure that the brake works before you use
the device. The brake pedal can heat up after continuous use. Please
do NOT touch it after the braking operation as this could cause injury.
10. Turn the handlebar to the right and left to ensure that it works
correctly and smoothly. Also check whether the handlebar stem is
tightened before riding the scooter.
11. Children should at all times ride under parental supervision. The su
pervising person should inspect the scooter prior to each use, in
order to ensure that all constituent parts are fully assembled and
tightened, so as to prevent accidents. The functions of self-securing
screw threads can be impaired after repeated loosening and
tightening of the connecting elements.
12. Always follow all local laws and regulations concerning road traffic
and scooter riding. Keep away from motor vehicles and watch out
for pedestrians. This scooter is not designed for use on difficult
terrain and is not recommended for feats.
13. Do NOT perform modifications to this product. Do NOT attach any
objects that are not supplied with the scooter.
14. Due to a possible risk of slamming or pinching during the assembly of
the scooter, the assembly as well as the adjustment has to be carried
out by an adult. Keep your fingers during assembly away from moving
parts and all locking mechanisms, in order to avoid the slamming or
pinching of fingers and related injuries. Make sure that all assembly
parts are mounted in a stable manner and are secured.
15. Ensure before using the scooter that all locking devices are
engaged.
16. Immediately replace worn and / or damaged parts.
17. The scooter is suitable for use, only for one person.
18. The scooter is not suitable for jumps.
19. Make sure that the stand is properly folded when using the scooter.
Pictures are
design examples.
Instructions for use
All beginnings are difficult, you therefore first have to master the
basics of scooter-riding, and then progress with time. Be extremely
cautious and not rush anything.
The scooter is ridden by regular pushing the foot against the ground.
To brake, simply step on the brake plate of the rear wheel. The
braking force can be dosed by a light or firm step. Before you ride at
higher speeds, you should practice riding at a slower speed and try to
safely come to a halt. You should basically never ride faster than you
can run!
Maintenance and storage
Check the product for any damage or signs of wear, before and after
use. For your own safety, you should not perform any structural
changes and should exclusively use original spare parts that you
can purchase from a www.authentic-sports.de. The product should
no longer be used, if any parts are damaged or sharp corners and
edges have emerged. You should not use any special detergents
when cleaning. You should instead clean your product with a towel
or a damp cloth. For storage, we recommend a safe and sheltered
place, so that people may not be injured and the product may not be
damaged. The ball bearing is maintenance free and does not need to
be oiled.
Roller- /bearing change
Replacement rollers and bearings should be replaced if they are worn
or else abraded. Both are available as an accessory from
www.authentic-sports.de. To change the rollers, loosen the axle screw
with the provided Allen wrench and remove the roller from the axle.
You can also use the Allen wrench to press the ball bearing out of the
wheel, in order to use it again (We however recommend that rollers
and bearings are replaced together). Insert the bearing with the spa-
cer back into the new roller and use the axle screw to mount both on
the scooter. Ensure that the axle is again securely screwed on before
using the scooter.
Disposal instructions
In the event of wear and expiry of the service life, please dispose the
product at the available return and collection systems. Questions can
be answered on site by the disposal company.
Service
Should you notice any defect on your product, we apologise for this
and we shall strive to rectify this defect as quickly as possible.
In this case, please contact: info@authentic-sports.de
Hotline: +49 2331 / 6289883
Authentic sports & toys GmbH
Gewerbepark Lennetal | Gründelbusch 33
58099 Hagen | Germany
www.authentic-sports.de
Art.-No: 513, 514
Status 12/18
Page 6/12
Werbung
