Feel-Maestro MR570 Bedienungsanleitung Seite 9

EN
Cleaning and maintenance
ATTENTION!
- Never clean the device while it is connected to the mains.
- Before cleaning disconnect the device and wait for full stop of
moving parts.
- Do not use abrasive and aggressive detergents, solvents, alkaline,
metal objects and wash-ups.
- Never submerge electric drive, its mains cable and plug in water
or other liquid, do not wash the drive in water or in a dish washing
machine.
-Wash cutting blades with special care!
Immediately after the use wash (without soaking for a long time)
the nozzles with warm soapy water using a soft nylon sponge, then
wipe with a dry clean towel. Water temperature must not exceed
60ºС. The blender can be washed in a dish washing machine;
however, the dosage of detergent must not be exceeded. After
handling some coloring products (for example, carrots) plastic parts
of the nozzle may become colored. After placing them in a dish
washing machine wipe them with vegetable oil.
After handling salty products the blender must be washed
immediately.
Let the blender completely dry.
Do not submerge and do not wash under a strong flow of water
the cover – chopper drive and the drive of wire whisk. It is
recommended to wipe them with a wet cloth; in case of strong
clogging it is allowed to wash the outside surfaces under a weak
water spray or with a wet napkin avoiding the splashes inside the
case.
9