Feel-Maestro MR 223 Bedienungsanleitung Seite 7

- Unwind the power cord completely.
ATTENTION! A small quantity of smoke or a specific smell may
appear after the first switching ON as the result of conservation
materials contact with heating element. This is a normal
phenomenon and it shall disappear after several minutes of
operation.
-Before switching on the hairdryer to the power supply, make sure
that the device switch (A/Pic.1) is set to "0" (OFF).
-Connect the device to the power supply.
-Choose the desired hairdryer speed by the switch (A /Pic.1).
Position
of the switch
А0
А1
А2
-Choose required heating power by the switch (B /Pic.1):
Position of the
switch
В0
В1
В2
The combination of A2 + B2 switches positions turns off the
maximum speed and By the end of use, first set the switches to "0",
and then unplug the device.
Enabling COOL mode significantly reduces the temperature of the
Designations
0
(OFF) - the device is switched off
The first speed - gentle airflow
Second speed - strong air flow
Designations
Minimum heating
Average heating
Maximum heating
COOL mode (cold air)
Function
Function
7
EN