Maintenance - Zee LEVANTINE Gebrauchsanleitung

MANUAL
MATERIALS
→ Stainless steel base plate/weight.
→ Aluminium cap for on the base plate with
powder coating.
→ Stainless steel tubes with powder coating.
→ Screw thread on foot and tube in stainless
steel.
→ Tap made of stainless steel & brass with
powder coating.
→ Chrome-plated brass garden hose connection.
CONTENTS
(1)
1 x Base plate.
1 x Cap for base plate.
1 x straight tube with garden hose connection.
1 x curved tube with shower head.
USE
→ If the Levantine stands out in the sun for a
long time, the water inside can become very
warm. Therefore you must let the shower
run empty before you come into contact with
the water.
→ Over time, standing water can become a
fertile breeding ground for bacteria. Therefore
you must let the shower run empty before you
come into contact with the water.
→ If you aren´t going to be using the Levantine
for a while, you must let the water run out of
the shower.
Disconnect the garden hose from the Levan-
tine until it has drained out completely.
→ The Levantine mustn't remain outside in freez-
ing temperatures and snow - and certainly not
if it is still fi lled with water.
→ The powder coating is an eff ective protection
against rust.
Attention: Never treat the coating with any
hard materials or objects. The coating also
shouldn't come into contact with hard sur-
faces. If you assemble the shower and set it
on the ground, make sure that the coating of
the base doesn´t hit the ground too hard. If
the coating is damaged, the exposed surface
can corrode.
→ We strongly recommend not using the shower
with seawater. The tubes of the Levantine are
made of stainless steel, but in the long run the
aggressive seawater will cause corrosion.
→ Chlorinated water will, in the long run and
through repeated contact, cause the coating
to discolour.
3
Levantine_handleiding.indd 6 Levantine_handleiding.indd 6
(2)
(3)
(4)
→ It is recommended to save the package and
use it for storage or when moving.

MAINTENANCE

→ Powder coating is a good stable protection,
also for outdoors, but regular maintenance will
help ensure that the coating remains intact.
→ Use a soft, non-pilling cloth or sponge.
→ Use a solution of warm water and a small
amount of pH-neutral cleaning product.
→ Carefully rinse the cleaned surfaces after-
wards.
→ The Levantine must be cleaned every three
months.
→ In an aggressive environment, such as on
the seacoast or in industrial zones, monthly
cleaning is highly recommended in order to
optimally maintain the coating.
ASSEMBLY
(1)
1. Place the base plate
surface & place the cap
2. Never use tools when assembling: they can
damage the powder coating.
3. Take the straight tube (3)
on the base plate with the cap at the level of
the central hole.
4. Hold the tube vertically and begin turning it
manually in the clockwise direction until the
screw thread turns properly in the tube.
5. Once you feel that the screw thread is turning
properly in the tube, keep turning until it's
good and tight.
6. Take the 2 nd tube with tap and shower head
and place it carefully with the screw thread on
the lowest tube.
7. Hold the tube vertically and begin turning it
manually in the clockwise direction until the
screw thread turns properly in the tube.
8. Once you feel that the screw thread is turning
properly in the tube, keep turning until it's
good and tight.
9. The Levantine is ready to use!
You can use a normal garden hose to supply
the water, provided that it has a ZEE coupling
(e.g. garden hose connection).
ENGLISH
on a fl at, non-sloping
(2) on it.
and place it carefully
(4)
18/12/20 12:30 18/12/20 12:30