Care, Maintenance And Repair; Care; Maintenance; Repair - Internorm RAFFSTORE Serie Bedienungsanleitung

5. CARE, MAINTENANCE AND REPAIR

5. CARE, MAINTENANCE AND REPAIR

5.1 CARE

Please only clean your Venetian blinds, when they are fully down. Never hold on to slats or
guiding rails, but use safe means to get up (e.g. ladder).
NOTE:
■ Always disconnect from power supply by taking fuse out or switching power off, before
working on the system (maintenance, cleaning).
■ Never pull on the cord guide.
■ Watch out for protruding edges (especially when cleaning the window sill below the guiding
rails).
■ Never press too hard against the slats, they could kink.
■ Never use a pressure cleaner. The surface of the slats might be affected by the pressure
and heat.
■ Remove dust with a soft brush.
■ Only use mild, standard household cleaner and rinse off the residue with clear water.
■ Do not use abrasive cleaners, scrubbing sponges or solvents (like e.g. alcohol, petrol).
PLEXOLux slat guide:
Please observe the following with care of acrylic glass/perspex: only clean the material with
a damp micro fibre cloth. Do not use any cleaning agents as these might damage or affect
the brilliant surface. Anti-static-polish leaves a slight dull, cloudy film on transparent material.
Leave to air-dry or dry with a clean, previously moistened artificial or natural leather cloth.
The micro fibre cloth and the leather cloth should only be used for cleaning acrylic glass and
should be rinsed well beforehand. Never wipe dust off dry!
50

6. UNINSTALLATION AND DISPOSAL

5.2 MAINTENANCE

■ Check the operating elements regularly for wear and tear damage and the product stability.
■ Check the texband (lift tape) for optical damage when cleaning the raffstore (rips,
obstacles). If you notice anything which could affect operation or in the worst case
could lead to damage, please report it promptly to your specialist dealer.
■ Arrange for specialists to exchange possible damaged elements in due time.
■ Do not use Venetian blinds, if repair is necessary.
■ Only use specialists to carry out repairs.
■ Always disconnect from power supply when working on the system (maintenance,
cleaning).
■ Only use original spare parts.

5.3 REPAIR

Only use original spare parts when exchanging worn out or defected parts. Third-party
products cannot guarantee to be manufactured and constructed in line with subsequent
conditions and according to safety guidelines.
Please contact the distribution partner as required.
6. UNINSTALLING AND DISPOSAL
CAUTION:
Danger to people or property through incorrect uninstalling.
Only arrange for specialist to carry out uninstallations!
Uninstallation and new installation of the product must be carried out by a specialist accor-
ding to the current guidelines and standards. Missing documentation needs to be requested
from the manufacturer in all cases before uninstallation or new installation.
Dispose of the possibly unserviceable product according to the valid legal requirements.
VENETIAN BLINDS
51
GB