Community Playthings W341 Gebrauchsanleitung

Product guide
W341, W351, W362, W363, 364, W365, W372, W373, 374, W375, W883,
W884, W885, W886 Outlast tables and seating
IMPORTANT
Save these instructions for reference
Recommended use
The Outlast tables and seating support many outdoor activities
including eating, art projects, manipulative and dramatic play.
They are available in Low, Medium, High and School heights,
and can be used almost anywhere outdoors as a combined set
or individually.
The smooth wooden table top provides a stable, gap-free
work surface. The wide stance of the legs ensure stability and
maximises leg room.
Seats and benches are wide and stable. Handles in the centre
of their tops enable easy hauling. Detached from the tables,
they promote open-ended play and unlimited arrangements:
at a picnic table, circled up for group gatherings, as balance
beams, or for large muscle play.
WARNING
c This product is intended for use by children of immature judgment,
therefore supervision is required at all times.
c Benches and seats are not designed to stack or nest.
CAUTION
c Benches and seats are heavy. Encourage cooperation when transport-
ing to prevent injury.
c Adults are responsible to prevent tables, seats and benches from being
used by children in unsafe combinations with other components.
c To prevent injury, caregivers and staff must familiarize themselves with
these materials before giving children access to them.
Accessories
Four lengths of table legs are available; for a table height of 40 cm, 45
cm, 50 cm or 55 cm.
Assembly
Benches and seats come fully assembled. They come in four heights, 20
cm, 25 cm, 30 cm and 35 cm. Sets consist of four cartons: a table top,
table legs and two benches or seats.
The tables comes in two cartons, one containing the table top, and the
other containing:
• Four legs
• Four barrel bolts
• Four machine screws
• Two hex keys
If your shipment is incomplete, please call customer service.
Legs attach to plastic brackets.
1. Turn table upside down.
2. Slide legs all the way into brackets.
3. Insert bolts through aligned holes.
4. Tighten screws with hex keys provided.
Community Playthings, Brightling Road, Robertsbridge, TN32 5DR
communityplaythings.co.uk • sales@communityplaythings.co.uk • 0800 387 457
© 2019 by Community Products (UK) Ltd •
JV42 Eu 0709 Revision 02
CAUTION
c Assembly to be carried out by a competent adult only. During
assembly children should be kept away from the product due to
possible risk of injury.
Construction
The wooden components are manufactured from long-lasting
acetylated wood and finished with a nontoxic stain. All edges and
corners are rounded for safety and ease of cleaning.
Stainless steel hardware is used throughout and all end grain is
protected by UV-resistant plastic guards formulated to ensure long life
in outdoor environments.
Maintenance
The tables and seating can be left outside all year around. Acetylated
wood weathers to a natural silver-grey if left untreated. Over time
outdoor surfaces may darken with mildew. To remove, scrub with a
cleansing agent. When dry, apply a nontoxic, penetrating stain, then
apply a nontoxic mildewcide to minimise mildew growth.
If you wish to maintain the original finished look of the tabletop while
using paint, protect the work surface with an appropriate cover.
Scrubbing to remove paint stains may also remove some factory stain,
however this will not affect weatherproofing.
Periodically inspect for splinters, broken or loose parts, and/or
malfunctions. Remove from service if any condition develops that
might make operation unsafe.
Cleaning
Mud and dirt can be removed with scrub brush and water. Over time
outdoors, surfaces may blacken with mildew. Remove with detergent
or a bleach disinfectant solution such as Milton Sterilising Fluid.
User modifications
We cannot be responsible for modifications made by customers to our
products in the field without our supervision, testing, or evaluation.
Ordering parts
To order replacement parts, contact customer service with a descrip-
tion of the part(s) needed and the ID code from the product.
Use only replacement parts supplied by Community
Playthings.
All of our packaging is recyclable (cardboard and LDPE).
Please recycle in accordance with local guidelines.