Battery Installation; Troubleshooting; Frequently Asked Questions - THINK GIZMOS TG803 Handbuch

1.3 Battery Installation

Drill Battery Information:
● A small crosshead screwdriver (Phillips) is required to remove the battery compartment
on the Drill. Insert 2x AA batteries (supplied) into the battery compartment observing the
correct polarity as indicated.
● Re-fit the battery cover and secure with the screw.
Battery Information for the Lights:
● A small crosshead screwdriver (Phillips) is required to remove the battery compartment
on the lights.
● The batteries are already inserted in the lights. Simply remove the plastic tab and it will
be ready to run.
(Warning - Remove the batteries if the toy is not going to be used for a long time.)

3. TROUBLESHOOTING

3.1 Frequently Asked Questions

Q. The wheels do not turn. Why Not?
A. Please make sure you do not overtighten the wheels as they will not turn easily. But
you will need to tighten them enough so that they move freely. Get your budding little
mechanic to test their skills at getting it just right.
Q. The Lights and Sounds do not work. Why Not?
A. Please check to see if the plastic tab disabling the batteries has been removed.
Remove the tab and try again.
Q. Arrghh! How do I disable the lights and sounds?
A. The lights and sounds are activated by pressing the button on the top of the light. To
disable remove the batteries.
4