Velleman CAMCOLVC26N Bedienungsanleitung Seite 13

CAMCOLVC26N
System
Settings: FW Update, FW Version
FW Update: If the memory card contains new firmware this can be installed
using this option. During the update, the respective status is displayed.
FW Version: Shows the firmware version installed on the camera.
Delete
Settings: Single, All
Select this option to delete files from the memory card.
Single: Delete individual files. Toggle between the files using the /
buttons.
All: Delete all files on your memory card.
7.4 Night Recording
During night recording, the IR LEDs at the front provide the light required
for taking photos.
The camera uses IR LEDs with a long wavelength to keep red light to a
minimum. The provided number of LEDs generate a high deflection angle,
thus allowing night recording at a distance of 3 to 15 m without
overexposing the object.
Reflecting objects can, however, also cause overexposure within this range.
Please not that night recording using the IR LEDs produces black and white
images.
7.5 Live Mode
In live mode, photos are triggered by
movement sensors or at intervals
according to the respective setting.
To set up the live mode, switch to the
ON position. The red status LED flashes
for 5 seconds, after which the camera
operates automatically and enters the
standby mode. Recording photos or
videos starts as soon as an animal
enters the detection area of the PIR
sensor zone.
7.6 Aligning the Camera
The test mode is advantageous for determining the best possible detection
angle and range of the movement sensor. For this purpose, attach the
camera to a tree at a height of approximately 1-2 m, and align the camera
with a desired direction.
V. 02 – 26/09/2018 13 ©Velleman nv