Child Safety Device; Offsound Control (Deactivation And Activation Of The Sounds); Power Management - AEG IEB 64000 XB Bedienungsanleitung

12 www.aeg.com
5.7 Lock
You can lock the sensors on the hob
while cooking zones operate.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.

5.8 Child Safety Device

This function prevents an accidental
operation of the hob.
To activate the function: the hob must
be deactivated. Touch
until flashes. Touch
for 4 seconds.
To deactivate the function: the hob
must be deactivated. Touch
seconds until
comes on for 4 seconds.
To override the function for only one
cooking time: activate a cooking zone.
comes on. Touch
until comes on for all zones. Set the
heat setting in 4 seconds. You can
operate the hob. When you deactivate
the appliance the function operates
again.
5.9 OffSound Control
(Deactivation and activation
of the sounds)
Deactivate the hob. Touch
seconds. Touch
comes on. Touch
choose one of the following:
• - the sounds are off
• - the sounds are on.
To confirm your selection wait until the
hob deactivates automatically.
.
for 4 seconds
. comes on
for 4
flashes. Touch .
for 4 seconds
for 3
for 3 seconds.
of the timer to
When the function is set to
hear the sounds only when:
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.

5.10 Power management

• All cooking zones are connected to
.
one phase. See the illustration.
• The phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones.
• The function activates when the total
electricity loading of the cooking
zones exceeds 3700 W.
• The function decreases the power to
the other cooking zones.
• The heat setting display of the
reduced zones alternates between the
chosen heat setting and the reduced
heat setting. After some time the heat
setting display of the reduced zones
stays on the reduced heat setting.
5.11 Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. Speed
of the fan is defined automatically on
basis of mode setting and temperature of
or
the hottest cookware on the hob. You
can also operate the fan from the hob
manually.
you can