AEG E6WHPED4 Montageanleitung Seite 4

4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washers
and the pedestal.
11. For washing machine. Put the
pedestal and appliance in
vertical position. If necessary,
adjust the appliance feet and
go to step 16. Check that the
screws are firmly crewed.
12. For tumble dryer. Unscrew the two
bottom screws from the back of
the appliance.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.