Lauben VTK01S Benutzerhandbuch Seite 7

■
NOT TO BE USED for any other purpose than the designed one.
■
Do not touch power cord by wet hands or if you're in a water.
■
This package contains small parts that may be hazardous for children. Always keep this product outside of reach of children. Sacks
or number of parts they contain may cause suffocation after choking or putting them over their head.
This appliance is designed only to be used in households or similar premises like:
■
Kitchen premises in shops, offices and other work premises
■
Hotel, motel rooms and other environments of a residential type
■
Guest-house type environments
Know your appliance
Lid
Outlet
Vessel
Base
Keeping hot
Temperature setting
Before its first use
Before its first use, clean the kettle following the next steps: fill the kettle with water by maximum water level, boil it and pour the
water out while repeating this step twice.
Note: maximum capacity of this kettle is 1.7 liters.
Steps for operation
1. If you want to fill the kettle, take it out from its base, open its lid and fill it with water. Keep its body and base dry and clean.
Note: NEVER fill the kettle over maximum level as the water may splash from outlet while heating it. Before you connect it to grid,
make sure the lid is closed tightly.
2. Jug kettle will be in standby mode and water temperature will be displayed on LCD display.
3. If you want to heat water, click "FAST BOIL" and the kettle will start to heat the water up to 100 ° C / 212 ° F automatically.
4. If you want any other temperature, set up the required temperature by using the buttons  and  (from 40 ° C to 100 ° C). The
data will flash up three times and then, the kettle will heat up water to required temperature. When the water reaches required
temperature, acoustic signal will be heard. Shortly after, power supply will be turned off and display will turn off.
On the display, inside temperature while heating will be displayed.
5. If you want to heat up water or boil it again and the temperature inside is below the target temperature, just click on the ON / OFF
button.
6. Jug kettle will start to keep water warm after pressing "KEEP WARM" (for four hours). You may adjust the temperature by pressing
the  and  button (from 40 ° C to 104 ° F C / 203 ° F).
Lid release for safe closure
Pouring button
Handle
Jug
Temperature setting
Display
DE
EN
CZ
SK
PL
HU
| 7