e-quinux tizi Flachmann Anleitung Seite 12

Your tizi Flachmann at a glance
‣
Illustration Page 2
EN
Downloaded from www.Manualslib.com
Micro USB Input
Charge your tizi Flachmann using the micro USB input. All
LEDs will remain lit once the Flachmann is fully charged. This
takes around 4-5 hours.
Status LEDs
The four blue LEDs display the battery level after you have
plugged in your charging cable. This LEDs will automatically
turn off after 10 seconds in order to save energy. Your tizi
Flachmann however, will continue to charge.
Full power output
Your tizi Flachmann automatically turns on as soon as you
plug in your USB cable here.
manuals search engine
12
EN
EN