Warranty - digimess PM3006 Gebrauchsanweisung

1.5

Warranty

The perfect working order of the power supply is guaranteed for 12 months as from delivery.
There is no warranty for faults arising from improper operation or from changes made to the power supply or
from inappropriate application.
If a fault occurs please contact or send your power supply to:
Agents details :
The power supply should be sent in appropriate packing - if possible in the original packing. Please enclose a
detailed fault report (functions working incorrectly, deviating specifications and so on) including unit type
and serial number.
Would you also kindly verify warranty cases by enclosing your supply delivery note. Any repairs carried out
without reference to a valid warranty will initially be at the owner's expense.
Should the warranty have expired, we will, of course, be glad to repair your power supply as per our General
Terms Of Assembly And Service.
1.6 Description
The digimess ® PM series is a comprehensive range of low cost general purpose switch mode power supply
units containing single, dual and triple output models. All models can operate in either constant voltage or
constant current modes and feature large red LED displays for ease of viewing.
The dual and triple output types also include external switching for independent, tracking, series and parallel
modes of operation.
2 Technical Data
2.1 General Data
Nominal temperature:
Operating temperature:
Relative humidity:
Atmospheric pressure:
Operating position:
Operating voltage:
Frequency:
Safety class:
Radio interference suppression:
+ 23 °C ± 1 °C
+ 5°C to + 40 °C
20 to 80 %
70 to 106 kPa
horizontal or inclined by ±15 °
sinusoidal alternating voltage (distortion factor < 5 %)
110/220 V (+ 10 %)
50 to 60 Hz (± 5 %)
1, according to EN 61010 Part 1
EN 55011 Class B
4