Convision CC-6605DIR-B Benutzerhandbuch Seite 9

■ Installation
L-Wrench
WDR Digital Sensor Day/Night H.264 Network Dome Camera
Machine Screw
With Rubber
Dome cover
Decoration Ring
Dome Base
Mount Screw
Base Housing
10
1. Base Housing Mounting
- Open the dome cover by loosening the 3 security screws using the
special L wrench provided.
- Mount the base of camera to a sturdy surface using the 3 screws
(1.5 inch) and the 3 premade holes on the base of the dome.
2. Power Connect & Monitor Impedance
- DC12V/500mA regulated power supply
- To avoid fire or shock hazards, only use a CE listed power supply.
3. Camera Module Adjustment
- Loosen the screws on the 3-axis camera bracket and adjust the
direction and angle of view.
- Make sure to retighten the camera bracket screws.
- Set all desired functions using the OSD menu.
4. Dome Cover Mounting
- Replace the dome cover on the base and tighten the 3 security
screws.
11
WDR Digital Sensor Day/Night H.264 Network Dome Camera