Inhaltsverzeichnis
Werbung
■ How to Use the Camera
RESET
Resets the camera settings to the factory defaults.
EXIT MENU.
Saves all the setting menus and then exits.
WDR Digital Sensor Day/Night H.264 Network Dome Camera
26
If there are problems with the camera operation, check the tables below.
If the problem persists, please contact the agent who supplied the product.
Problems
Nothing appears on the
ㆍCheck the power connection.
screen.
ㆍCheck the LAN Cable.
ㆍMake sure that the lens is clean.
Clean the lens with a clean lint free cloth or
brush.
The video image is not
clear.
ㆍMake sure that the screen is not exposed
directly to a bright light.
Re-position the camera if necessary.
There is a problem with
ㆍ Check if an appropriate power source to
the camera operation.
the camera complies with the manufacturer's
The camera surface is
standard requirement, or if the voltage is
too hot and black stripes
fluctuating. Check for ground loops.
appear on the screen.
The MOTION
ㆍCheck that motion detection of setup on the
DETECTION function is
web view is 'OFF'
not working.
Colors are not quite
ㆍCheck the 'WHITE BAL' setting.
right.
The image on the
ㆍCheck the video format of the your camera
screen is black
(NTSC / PAL)
COLOR mode is not
ㆍCheck if the AGC menu is set to the OFF
working.
position.
ㆍCheck if the AGC menu is set to the OFF
SENS-UP function is not
position.
working.
ㆍCheck if the SHUTTER menu is set to
MANUAL mode.
27
WDR Digital Sensor Day/Night H.264 Network Dome Camera
Troubleshooting ■
Troubleshooting
Werbung
Kapitel
Inhaltsverzeichnis
