Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FN-125890
PARTS DESCRIPTION
1.
Main body (Fan guard + Fan blade)
2.
Indicator light of charging
3.
Power/speed button
4.
Indicator light for power/speed
5.
USB charge jack
6.
handle
7.
Base
8.
USB cable
HOW TO CHARGE
This product contains a built-in lithium ion battery, which must be charged before use.
1.
Connect one end of the USB cable to the charge jack of the appliance, and another end to the USB port of
the computer or other DC5V USB adaptor port. Be sure it fits tightly.
2.
The appliance begins to charge, the indicator light will flash red. When the battery is full, the indicator light
will be still in red.
Caution: if strong heat occurs during charging, stop charging or using the product and contact our after-sales
customer service for advice.
OPERATION
Use the power/speed button on the base to switch the fan. The indicator light for power/speed will illuminate in
blue. Press the button to select the appropriate fan speed.
Press the power/speed button once
Press the power/speed button twice
Press the power/speed button three times
Press the power/speed button four times
Press the power/speed button five times
Note: press and hold the button for approx. 2 seconds to turn on the oscillation function horizontally. Press and
hold the button again to turn it off. You can also push the fan head up and down to adjust the air supply angle
vertically.
Low speed
Second speed
Third speed
Highest speed
Power off
- 9 -
EN
Werbung
