Parts Description; Technical Data - Waves HP-104444 Bedienungsanleitung

PARTS DESCRIPTION
1. Hotplates
2. Indicator lights
3. Thermostat adjustable control knob
BE SURE TO READ IMPORTANT SAFEGUARDS ENCLOSED
HOW TO USE YOUR HOT PLATE
1) Put the hotplate on a flat, dry and heat resistant surface.
2) Turn temperature control dial to "0".
3) Put the plug into power outlet.
4) Turn control dial from "0" to any selected setting. The unit will cycle on and off to main
selected temperature.
5) The indication light at the front of appliance will turn off when the hot plate reaches the
selected temperature, and the procedure of the heating will stop and recycle to maintain
the temperature.
6) Heating Element will begin to heat immediately. DO NOT touch while in use, the metal
surfaces will become hot.
7) When not in use, unplug cord from wall outlet and allow the unit to cool.
WARNING!! Please do not touch surface while in use. The accessible surface may get hot when
the appliance is operating.
CAUTION
DO NOT use pans that are unstable and easily tipped. Use flat‐bottom pans to insure full contact
with the hotplate for maximum heat efficiency.
For long‐life performance, avoid dropping any items onto the hotplate.
When use this hotplate for first time, there are some smoke, it is normal and safe.
HOW TO CARE FOR YOUR HOTPLATE
Always unplug unit and allow for cool before cleaning. Never immerse in water.
Clean hotplate with a soft, damp cloth or a non‐abrasive cleaner. Wipe dry.
SAVE THESE INSTRUCTIONS
1. This appliance is for household use only.
2. A short power‐supply cord is provided to reduce the hazard resulting from entanglement or
tripping over a longer cord. An extension cord may be used with care; however, the marked
electrical rating should be at least as great as the electrical rating of this appliance. The
extension cord should not be allowed to hang over the counter or tabletop where it can be
pulled on by children or tripped over.
TECHNICAL DATA:
Operating voltage: 220‐240V~ 50Hz
Power: 2500W