Introduction - Joerns Oxford OXF-UNISCALE100 Benutzerhandbuch

English

1. Introduction

About your scale:
The Oxford Digital Scale is a technologically advanced, microprocessor controlled, digital
weighing device. It features two large, easy to read, Liquid Crystal Displays (LCD) that show the
patient's weight from either side.
The controls are simple and straightforward to use. The Oxford Digital Scale is powered by an
inexpensive, common 9 volt battery.
The Oxford Digital Scale can be used in conjunction with the Oxford Presence and Stature. The
model numbers for the scale are:
OXF-UNISCALE100
OXF-UNISCALE100EU
OXF-UNISCALE101
OXF-UNISCALE101EU
OXF-UNISCALE102
OXF-UNISCALE102EU
The CE mark (Europe Only):
Intended Use:
The Oxford Low Profile Weigh Scale is a RoHS compliant precision scale for use in portable patient
weighing systems. The scale is designed to be connected between patient hoist mechanism and
the patient sling apparatus. The Oxford Low Profile Weigh Scale is NOT intended to be used during
patient transportation.
Serious Incident Reporting
In the event of a serious incident taking place during use of this product, affecting the patient and/
or care-giver, it must be reported to the product manufacturer or authorised distributor. Should
the incident take place within the European Union (EU), it must also be reported to the local
competent authority within the member state.
4-point cradle with scale (calibrated for UK)
4-point cradle with scale (calibrated for non UK)
6-point spreader bar with scale (calibrated for UK)
6-point spreader bar with scale (calibrated for non UK)
4-point Adaptive power cradle with scale (calibrated for UK)
4-point Adaptive power cradle with scale (calibrated for non UK)
The Oxford Digital Scale carries the CE mark and
complies with the following EC Directives:
• Medical Device Directive (MDR) 2017/745
• EMC Directive (2014/30/EU)
• NAWI Directive (2014/31/EU)
• RoHS Directive (2011/65/EU)
Oxford
Low Profile Weigh Scale
®
3