krispol STARCUS CONNECTOR MINI Bedienungsanleitung Seite 6

3. PRODUCT PARAMETERS
Indoor use only: Wi-Fi: 2,4 4 ГГц (802.11b / n / g)
Power consumption: DC 5 V / 1 A (USB type A)
Radio frequency: 433,92 MHz
Working temperature: 0 ° C ~ 40 ° C
Dimensions (mm): L132,2 * W75 * H36
4. INDICATOR STATUS
Colour
Constant blue
Flashing red slowly
Flashing yellow slowly
Flashing red quickly
Flashing purple slowly
Flashing green slowly
5. START-UP
1
Press the button "add hub".
3
Enter the password of the Wi-Fi network
with which the hub is to cooperate.
5
e hub has been successfully added.
e device is working properly
No connection to Wi-Fi
Connecting to Wi-Fi
Bridge reset
Pairing
Update is in progress
2
Press and hold the programming button on the hub for about 2 seconds.
slow blinking in red should start blinking purple.
purple
4
en disconnect from the home Wi-Fi network and connect to the network shown by
the "Connector" hub.
blue
6
Enter the name of the new hub. Installation complete.
Meaning
2s
red
purple
blue
Duration
Constant
Till the update of the status
Till the update of the status
5 times
Till the update of the status
Till the update of the status
purple
e LED
blue