Blade FR-TEC Suzuka Wheel Elite Bedienungsanleitung Seite 7

Troubleshooting :
• Please re-insert the steering wheel or check if the guide controller is functioning normally or not when the LED indicator
does not light up.
• When the steering wheel does not respond or the screen does not react, the device may have crashed; please reboot the
device and re-insert the steering wheel.
• When the steering wheel is not operated properly, please re-insert the steering wheel.
• The guide controller must be turned off when connecting to prevent the connection between the controller and device from
failing.
• Because the programming design is equipped with a memory function, therefore, if the button configurations are incorrect,
please follow "Cleanup Programming" or "Program Design Full Deletion" to delete the programs.
• If any direction button or pedal is not in place or set improperly, please correct as follows ( ** Calibration: please switch
the steering wheel to 270 degrees, the wheel rotation switch. ):
3. Press"L1+L2+R1+R2"buttons at the same time, and the LED indicator
will flash at the frequency of one time per second.
4. Slightly rotate in a left-hand direction until reaching the maximum position, and
the LED indicator will flash at the frequency of two times per second.
5. Slightly rotate in a right-hand direction until reaching the maximum position, and
the LED indicator will flash at the frequency of three times per second.
6. Step the right pedal to the maximum position, and the LED indicator
will flash at the frequency of four times per second.
7. Step the middle pedal to the maximum position, and the LED indicator
will flash at the frequency of five times per second.
8. Step the left pedal to the maximum position, and the LED indicator flash will
slow down; press OPTIONS once and the correction is completed.
12 13