Blade FR-TEC Suzuka Wheel Elite Bedienungsanleitung Seite 5

PROGRAMMING BUTTON DESIGN
Remarks: Please turn the hand-brake to OFF before programming.
Programming features:
• The programming buttons
/ 1 / X / Y, / 3 / B / A,
/ R, R2 / 8 / RT / ZR.
• The defined programming buttons include: left bumper, right bumper, HAND-BRAKE, cluth accelerator, and brake.
Program Design Configuration
• Press the "PROG" button once, and then the red LED will flash quickly.
• Press the defined programming button once, and then the red LED will flash slowly.
• Press the programming button once, and then the red LED will light up. The programming design is completed.
Cleanup Programming
• Press the "PROG" button once, and then the red LED will flash quickly.
• Press the defined programming button once, and then the red LED will flash slowly.
• Press the defined programming button once again, and then the red LED will light up. The programming step is cleared.
Program Design Full Deletion
• Press the "PROG" button once, and then the red LED will flash quickly.
• Press and hold OPTIONS/10/MENU/+ buttons for 4 seconds until the red LED lights up. All the defined button functions
will be deleted and the sensitivity will be restored to the High level.
Program exit
• Press the "PROG" button once, and then the red LED will flash quickly; press the "PROG" button once again to quit the
programming sequence. The previous data remains unchanged.
• Press the "PROG" button once, and then the red LED will flash quickly; if there is not any further action, the programming
sequence will be quit automatically after 10 seconds
Sensitivity Configuration
• Press the "PROG" button once, and then the red LED will flash quickly.
• Press the left or right of directional button to set the sensitivity to the Middle level. The red LED is on and the setting is
successful.
• Press the "PROG" button once, and then the red LED will flash quickly.
• Press the upper of directional button to set the sensitivity to the High level. The red LED is on and the setting is successful.
• Press the "PROG" button once, and then the red LED will flash quickly.
• Press the lower directional button to set the sensitivity to the Low level. The red LED is on and the setting is successful.
• Press and hold the OPTIONS/10/MENU/+ buttons for 4 seconds until the red LED lights up. All the self-defined button func-
8
/ 4 / Y / X, / 2 / A / B, L1 / 5 / LB / L, L2 / 7 / LT / ZL, R1 / 6 / RB
tions will be deleted and the sensitivity will be restored to the High level.
Direction of maximum effective angle setting method at 900° Gear Position
• The gear position switch to "900°".
• Press the "PROG" button once, and then the red LED will flash quickly.
• Rotate the steering wheel from the central position to the left-hand or right-hand direction at any angle which is more than
60°, and then keep it still.
• Press the "OPTIONS/10/MENU/+" buttons once until the LED lights up. The current position will be the MAX effective angle
configured thereof.
• There are two ways to remove the angle configuration:
• a.Press the "PROG" button once, and then the red LED will flash quickly. Then press and hold the
MENU/+ buttons for 4 seconds to delete the angle configuration;
• b.Press "PROG" button once, and then the red LED will flash quickly. Then rotate the steering wheel from the central
position to the left-hand or right-hand direction at the MAX angle (900°); press the OPTIONS/10/MENU/+ buttons again and
the LED will light up, and the angle is restored to 900°.
Introduction of 3-pedal:
• The clutch function is equipped in the 3-pedal, and is compatible with the games which support this function.
• The left pedal is the clutch, the middle one is the brake, and the right one is the gas.
• Only gas and brake functions can be used if a game does not support clutch.
Introduction of Six-speed shifter
• This function is not applicable unless the games support it.
• The MODE switch can be turned to the Six-speed shifter position; if the switch is OFF, the Six-speed shifter positions are
set at 1, 2, 3, 4, 5, 6, and R. If the switch is ON, the Six-speed shifter positions are set at 7, 8, 9, 10, 11, 12, and R subject
to PC mode only.
• The HAND-BRAKE switch of function is applicable; if the hand-brake switch is OFF, HAND-BRAKE is disabled; if the HAND-
BRAKE switch is ON, parking brake is workable.
• If the game/software do not support hand-brake function, please go to the programming settings to map the key, by following
steps:
1. Switch off the Hand-brake.
2. Press PROG. key, the LED flashes quickly.
3. Switch ON the Hand-brake, then switch back to OFF, the LED flashes slowly.
4. Press the mapping key, the LED is ON. The setting is completed.
9
O P T I O N S / 1 0 /