Hookup Diagram - Behringer U-PHONO UFO202 Bedienungsanleitung

26 U-PHONO UFO202 User Manual

5. Hookup Diagram

Ground
Line/Phono
Computer USB
Headphone Out
5.1 Hooking up a record player
1. To transfer music from a record player, a special
preamplification process must take place in order to boost
the low signal level coming from the player. To do this,
simply move the LINE/PHONO switch on the UFO202 to the
right (PHONO selected).
2. Connect a stereo RCA cable from the record player outputs
to the RCA inputs on the UFO202. The player will also likely
have a ground cable that needs to be attached to the
ground terminal on the UFO202.
RCA Ins
RCA Outputs
3. Connect a monitoring device. You may plug speakers into
the RCA outputs or connect a pair of headphones to the
PHONES output.
4. Connect the attached USB cable to a free USB port on
your computer.
Line/Phono
Computer USB
Headphone Out
5.2 Hooking up a tape player
1. Move the LINE/PHONO switch on the UFO202 to the left
(LINE selected).
2. Connect a stereo RCA cable from the tape player outputs
to the RCA inputs on the UFO202.
RCA Ins
RCA Outputs