Product Description And Specifications - Bosch GBH 2-23 REA Professional Originalbetriebsanleitung

14 | English
Hammer Safety Warnings
Wear ear protectors. Exposure to noise can cause hear-
u
ing loss.
Use auxiliary handle(s), if supplied with the tool. Loss
u
of control can cause personal injury.
Hold power tool by insulated gripping surfaces when
u
performing an operation where the cutting accessory
or fastener may contact hidden wiring or its own cord.
Cutting accessory and fasteners contacting a "live" wire
may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Use suitable detectors to determine if utility lines are
u
hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone. It is also suitable for drilling without impact
in wood, metal, ceramic and plastic. Power tools with elec-
tronic control and right/left rotation are also suitable for
screwdriving.
1 609 92A 24G | (12.03.2021)
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS plus drill chuck
(2) SDS plus tool holder
(3) Dust protection cap
(4) Locking sleeve
(5) "Drilling/hammer drilling" selector switch
(6) Release button for "drilling/hammer drilling" se-
lector switch
(7) Rotational direction switch
(8) Lock-on button for on/off switch
(9) On/off switch
(10) Dust box assembly
(11) Release button for dust extraction system
(12) Release button for dust box
(13) Auxiliary handle (insulated gripping surface)
(14) Button for adjustment of the telescopic guide
(15) Dust extraction system
(16) Telescopic guide
(17) Button for depth stop adjustment
(18) Dust collector for drill bits
(19) Handle (insulated gripping surface)
(20) Securing screw for keyed chuck
a)
(21) Keyed chuck
(22) SDS plus shank for drill chuck
(23) Guide groove for dust extraction system
Dust box flap
(24)
(25) Filter element (Microfilter System)
(26) Adapter box for external dust extraction
a)
(27) Extraction outlet
a)
(28) Extraction hose
(29) Depth stop
(30) Release button for dust collector
(31) Dust collector for hollow core bits
(32) Catch for dust collector
(33) Universal holder with SDS plus shank
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Rotary hammer
Article number
Rated power input
No-load speed
Impact rate
a)
a)
a)
a)
a)
a)
GBH 2-23 REA
3 611 B50 5..
W 710
-1
min 0−1000
-1
min 0−4400
Bosch Power Tools