Final Assembly - Teufel WJT 2 Gebrauchsanweisung

Final Assembly

Assemble the prosthesis for
fitting. Pay attention to the
instructions for the different
components.
Make sure that the lock
body is completely free
of any residue (e.g. resin residue,
dust, etc.) before final assembly.
Do not drill through
the pin duct.
Torque for the locking mecha-
nism in the lock body: 5 Nm.
Torque for the 4 flat head
screws: 12 Nm.
WJT 2 Lock System
Button
Extension
Two different button extensi-
ons are available, which can be
bought as accessories if requi-
red. They are used instead of
the original button. To replace
the original button, unscrew it
from the locking mechanism,
and install one of the button
extensions.
Follow the user manual
enclosed with the button
extension for instructions on
how to dismount the standard
button and how to install the
button extension.
ES
FR
User Manual EN
DE
EN-13
PL