Werbung
• The recess for the burner should be made of a heat resistant material, special profiles are available for
situations where used material does not meet this requirement.
• Make sure the material used on top, back- and sidewalls of the burner is heat resistant.
• Keep a safe distance of at least 400 mm above the bio ethanol burner and minimal 50 mm on the sides.
• In case a television is placed directly above the burner, we recommend a safety distance of at least 800 mm
Always ask your TV supplier wether your TV is suitable for hanging above a fireplace.
• After the bio ethanol burner is placed in the recess make sure the bio ethanol burner is levelled.
lnstructions for building in a bio ethanol burner
l400MM
!
.......,-�---,
! 1
A
BOOMM
400MM
C
B
problem
possible cause
formation of soot
wrongfuel
formation of soot
lire-opening is covered with
decoration material
burning time toa short
wrong fuel (e.g. gel, methylated
spirit)
burning time toa short
burner has not been filled
completely
flames toa high
wrong fuel (e.g. gel, methylated
spirit) or draught
flames toa low, not
burner has not been filled
visible
completely
flames toa low, not
fuel is almost used up
visible
flames do not disappear
occurs with larger burner when
after the latch has been
it is in the middle of the burning
closed
time. Ethanoldamp then seeks a
way out.
Please visit our website for more extensive problem solving.
The warranty on this product is 30 years. Any change and/or alteration to the insert, surface or burner is
unacceptable and will cause the warranty to expire.
Xaralyn reserves the right to make any technica! alterations in order to improve the characteristics and/or
safety of the product. Xaralyn cannot be held responsible for possible damages or personal injuries caused by
misuse or incompetent use of the bio ethanol burner.
Xaralyn thanks you for the confidence in our product and wishes you many years of enjoyment with
your purchase.
Quick trouble shooter
Warranty
solution
ONLYuse Xaralyn CLlO0
make sure the fire opening is free of
decoration material
ONLYuse Xaralyn CLlO0
extinguish the burner. Let it cool down for
at least 30 minutes and then refill
ONLYuse Xaralyn CLl00
prevent draught
extinguish the burner. Let it cool down for
at least 30 minutes and then refill
extinguish the burner. Let it cool down for
at least 30 minutes and then refill
open the latch and quickly close it again to
refrain the oxygen supply.
This can also easily be blown out
Werbung
