Inhaltsverzeichnis
Werbung
ENGLISH
TECHNICAL DATA
Type: Unifier (4185 / 4186)
Input: Micro-USB, 5V/2A, 9V/1.67A
Indoor use only
Output power: 10W MAX
Wirelessly charges Qi-compatible devices
LED RING INDICATOR
Blue slow pulsing
Blue fast blinking
INSTRUCTION FOR USE
•
Connect the USB cable to the power adapter and
to Unifier. Plug it into the wall socket.
•
For wireless charging, place the device to be
charged on top of the UMAGE logo on the charger.
The device must be placed directly over and center
of the logo on the charger for the charging function
to work optimally. Note that some devices, you
may have to activate wireless charging in settings.
•
If your battery is completely discharged, it may
take a few minutes before it starts charging. This
is entirely normal. You can see that the battery has
begun charging when the battery symbol appears
on your phone.
GOOD TO KNOW
•
USB cable length and quality influences charging
speed and performance.
•
Devices may get warm during charging; this is
completely normal and they will gradually cool
down again after they are fully charged.
•
Charging time may vary based on the device's
battery capacity, charge level, the age of the battery
and the temperature in the surrounding area.
STATUS
Charging
Error, remove or readjust
device
•
Charger storage temperature: -20°C to 25°C
•
Charger operating temperature: 0°C to 40°C
Unplug the charger from the power source before
cleaning and when it is not in use. To clean the
charger, wipe with a moist cloth. Never submerge
the charger in water. Save these instructions for
future use.
DEUTSCH
TECHNISCHE DATEN
Art: Unifier (4185 / 4186)
Eingang: Micro-USB, 5V/2A, 9V/1.67A
Nur Innenanwendung
Ausgangsleistung: 10W MAX
lädt Qi-kompatible Geräte drahtlos auf
LED-INDIKATOR
Blau langsam blinken
Blau schnell blinken
BENUTZERINFORMATION
•
Das USB-Kabel an das Netzteil und LIVBOJ
anschließen und das Kabel in die Steckdose
stecken.
•
Zum kabellosen Laden das zu ladende Gerät
auf das Pluszeichen (+) des Ladegeräts legen.
Für optimales Laden muss das Gerät akkurat auf
dem Pluszeichen (+) des Ladegeräts liegen. Bitte
beachten, dass bei manchen Geräten kabelloses
Aufladen erst unter "Einstellungen" aktiviert
werden muss.
•
Bei vollständig entladenem Akku kann es
bis zum Ladebeginn einige Minuten dauern.
Sobald der Ladevorgang beginnt, erscheint das
Batteriesymbol im Telefondisplay.
STATUS
Laden
Gerät fehlerhaft, entfernen
oder erneut einstellen
Werbung
Inhaltsverzeichnis
