Cleaning And Maintenance; Specifications - Pro-Elec PELL0209 Anleitung

• When your room reaches the desired temperature, slowly rotate the thermostat
control counter clockwise until the power light goes out. The thermostat can now
be left at this setting. As soon as the room temperature has dropped below the set
temperature, the unit will switch it self on automatically until the set temperature
has been reached again. In this way the room temperature remains constant with
the most economical use of electricity.
• If you want to change the room temperature setting, rotate the thermostat knob
clockwise to raise the temperature, or counter clockwise to lower it.

CLEANING AND MAINTENANCE

• Always remove the plug from the mains socket and allow the radiator to cool down
before cleaning the heater.
• Wipe the radiator with a soft damp (not wet) cloth.
• Do not use any cleaning chemicals such as detergents and abrasives.

SPECIFICATIONS

Model
Rated Voltage
Frequency
Rated Power
Heat Output
Nominal heat output P
Min heat output P
min
Max heat output P
max
Auxiliary electricity consumption
At nominal heat output el
At minimum heat output el
In standby mode el
sb
With mechanical thermostat room temperature control
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
This product is only suitable for well insulated spaces or occasional use.
nom
max
min
As is typical for all portable heaters -
PELL0209
220-240VAC
50/60Hz
2500W
0,9003kW
0kW
0,9003kW
0kW
0kW
N/A
YES
GB
PELL0210
220-240VAC
50/60Hz
2500W
0,9003kW
0kW
0,9003kW
0kW
0kW
N/A
YES
Made in China. PR2 9PP
Man Rev 1.0