Fault Finding - Fein Dustex 35 LX AC Bedienungsanleitung

All manuals and user guides at all-guides.com
OBJ_BUCH-0000000207-001.book Page 38 Monday, October 12, 2015 11:09 AM
en
38
persons. Prior to disassembly, the
vacuum cleaner should be cleaned in
order to prevent any risks.
The room/enclosure in which the
vacuum cleaner is disassembled
should be well ventilated. Wear per-
sonal protective equipment during
maintenance. After the maintenance,
the maintenance area should be
cleaned.

Fault Finding.

Malfunction
Vacuum cleaner cannot
be switched on.
Reduced vacuuming
capacity.
Dust escapes during
vacuuming.
No suction capacity
when wet vacuuming.
The automatic shut-off
(while wet vacuuming)
does not respond.
The current spare parts list for this
vacuum cleaner can be viewed on the
Internet at www.fein.com.
If required, you can change the
following parts yourself:
Fleece filter bag, disposal bag, flat-fold
filter, hose, tool adapter, elbow,
vacuum tubes, crevice nozzle, floor
nozzle, bristle lips, rubber lips, step
adapter, vacuum brushes
Cause Troubleshooting
Circuit breaker of Ensure power supply.
power connection
has tripped.
Vacuum cleaner in Set operating-mode selector
remote control switch to "I".
operation.
Vacuum cleaner not Mount vacuum cleaner lid
fitted correctly. properly and completely
close both fasteners.
Vacuum system Clean vacuum hose and
clogged. extension tubes.
Fleece filter bag full. Replace fleece filter bag.
Flat-fold filter full. Replace flat-fold filter.
Disposal bag full. Replace disposal bag.
Incorrect installa- Correct installation position
tion position of of flat-fold filter.
flat-fold filter
Container full. Empty container.
Sensors soiled/ Clean sensors and space in
dirty. between with a brush.
Container full. For electrically non-conduc-
tive liquids, check filling level
and empty container, as
required.