Haas 3007 Bedienungsanleitung Seite 2

OHA-Multi-Connector (GB)
1. Slide the open end of the OHA Multi-
Connector over the end of the tube and
position the hose clamp in the recess pro-
vided. Then tighten the hose clamp rmly
while maintaining its position.
3. Mark the connection pipe to the in-
sertion depth, apply lubricant to it, insert
it and x it in place with the other hose
clamps.
# 3007
2. Remove the recesses according to the
required size of the tube used.