Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Battery charge indicator and battery low warning
en
The parent unit will work up to 8 hours without charging, but this depends on the amount of
activity and the level of the charge in the batteries. On the display you can see the charging
status:
Battery icon full
Battery icon 1/2 full
Battery icon empty / battery symbol flashes
Parent Unit
• When battery is low, the power LED becomes Red. Low Battery Icon is turned on. Battery
low beep tone alarm will be generated.
• The parent unit switches off after at least 15 minutes from alarm starts
• During battery charging, the power LED is flashing Red. Low Battery – Mid Battery – Full
Battery Icons are continuous flashing one by one to indicate the charging is in progress.
... ... ... ... ... ... ... ... ... ...
• When battery is high or charging is completed. Full Battery Icon will be turned on without
flashing.
• When battery is not installed, battery icon will NOT turn on and the power LED will NOT
turn Red.
Baby Unit
• When battery is low, the power LED becomes Red
• When battery is not installed, the power LED will NOT turn Red
Baby unit to parent unit paging
Useful if one parent is in the baby's room and needs to contact the other. Also helps to find a
mislaid parent unit.
At the baby unit
Press and hold the Paging key
switched off by pressing any key on the parent unit or by pressing the Paging key
baby unit once again.
Paging function have the Time-out after 2 minutes.
Display of the temperature and humidity in the baby's room
Press and hold down the OK/Menu key
The temperature and humidity in the baby's room will be displayed. The information will be
updated once in a minute.
Press and hold down the OK/Menu key
display.
= full capacity
= approx.half capacity
= batteries must be charged
briefly. The parent unit will emit a tone. The tone can be
for approx. 2 seconds.
for approx. 2 seconds to return to the date/time
26
on the
Werbung
Kapitel
Fehlerbehebung
