Installation; Frequency Selection - GREAT LENGTHS ULTRASONIC 5000-T Betriebsanleitung

1. INSTALLATION

• Unpack the machine carefully.
• Pull off the tweezer support (pos. 11). Take off
the tap and rotate the tweezers support toward
external side of 90°.
• Insert the plug into a 220 –230 volts grounding
socket. WARNING: If you connect the plug
to a NON-GROUNDED socket, permanent
damage, which is not covered by warranty,
could occur.
For those countries with 120 volts power
supply, the plug must be inserted in a 120
volts grounded socket.

2. FREQUENCY SELECTION

The new US 5000 automatically finds its own frequency.
This means that ALL tweezers are interchangeable and may be easily replaced.
• The tweezer's plug-in socket is situated on
the right side of the front of the machine (pos.
3). Rotate the holding ring. Carefully align the
pins with the holes in the socket, push lightly
in order to insert the plug and then rotate the
holding ring to lock into place. Now, you can
turn the machine ON by pressing the switch
located on the backside of the machine (pos. 5).
• The display will light up and the writing
"GREAT LENGTHS" will appear.
GB