Cleaning And Maintenance - Deltaco SH-DB01 Benutzerhandbuch

2. Mount the back cover to the wall with screws
(included), or paste to a smooth surface (like
glass) with 3M double adhesive sticker (not
included).
3. Optional: Connect 8-24V DC wire to the
conduction screws (not included).
4. Install MicroSD card (Class 6 or above) (not
included).
5. Install the 18650 batteries (not included).
6. Reset the doorbell (see Reset)
7. Mount/hang the doorbell onto the back cover.
Connecting the chime to the doorbell
camera
1. Press and hold the volume button on the chime
for about 4 seconds, until the LED indicator lights
up.
2. Press the doorbell button on the doorbell
camera within 5 seconds to pair.
3. The chime is now connected to the doorbell
camera and you can now change ringtones.
Reset
Long press on the doorbell to wake the device,
then press and hold the reset button for about 5
seconds.
Install and use
1. Download and install the app "Deltaco smart
home" from Apple App Store or Google Play
Store on your mobile device.
2. Launch the app "Deltaco smart home".
3. Create a new account or log in to your existing
account.
4. Tap "+" to add the device.
5. Choose category and then the type of product
from the list.
6. Connect the device to power.
7. If the LED/lamp does not flash: Reset the
device.
If the status indicator flashes: Confirm in the app.
8. Confirm the Wi-Fi network and password.
9. Enter the device name.

Cleaning and maintenance

Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device
does not operate correctly, replace it with a new
device.
Clean the outside of the device using a soft cloth.
Support
More product information can be found at
www.deltaco.eu.
Contact us by e-mail: help@deltaco.eu.
EST
1. PIR (püroelektriline infrapunaandur): Seadme
liigutamise korral saadetakse teie
mobiiltelefonile sõnum või kõne.
2. Infrapuna-öönägemine: Lülitub sisse, kui
valgust on alla 2 luksi.
3. Mikrofon.
4. Uksekella nupp:
3 funktsiooniga: Vajutage sisselülitamiseks /
uksekella nupp külalistele / sidumiseks teise
eraldiseisva uksekellaga (ei ole kaasas).
5. Kaamera lääts.
6. Valgusdiood:
Sinine aeglane vilkumine: ühenduse ootel.
Sinine vilgub 5 sekundit: Keegi vajutas uksekella
nuppu.
Punane vilgub 5 sekundit: WiFi ühendus
ebaõnnestus.
7. Kõlar.
8. Vargusvastane kruvi.
9. Lähtestamisnupp.
10. Patareipesad kahele 18650 patareile (ei ole
kaasas)
11. Sisemine toiteühendus.
12. USB Micro-B sisend: laadimine pingega 5 V.
13. Juhtivad kruvid ühendamiseks 8-24 V AV
juhtmega.
14. Pesad uksekella paigaldamiseks.
15. Paigaldusavad kruvidele.
16. Vastuvõtja valgusdiood.
17. Vastuvõtja helitugevuse nupp.
18. Vastuvõtja tooni muutmise nupp.
A N O R D I C B R A N D
5