Manual Cooking - hanseatic HFH1800-6BD Gebrauchsanleitung

6. In order to adjust the cooking
temperature, press the
sor.
The temperature display will
flash.
7. Tap the or
the desired cooking tempera-
ture is displayed. The display
will flash first. Then, after a
short time, the flashing stops
and the cooking temperature is
saved.
8. Briefly press the
start the cooking process.
You'll hear the air heating up
and circulating on the inside.
After the cooking time has
elapsed, you will hear five
beeps, and the appliance will
switch off.
You can also adjust the
cooking temperature and
cooking time while cooking.
sen-
sensor until
sensor to
Operation Page EN-13

Manual cooking

1. When the control panel is not
illuminated, briefly press the
sensor .
The control panel lights up. The
standard temperature (180°C)
and the standard cooking time
(0:15 hr) are displayed on the
control panel.
2. Continue to Step 7 if you wish
to use these values for cook-
ing.
3. In order to adjust the cooking
time, press the
The cooking time will flash.
4. Tap the or
the desired temperature is dis-
played. The display will flash
first. Then, after a short time,
the flashing stops and the
cooking time is saved.
5. In order to adjust the cooking
temperature, press the
sor.
The temperature display will
flash.
6. Tap the or
the desired cooking tempera-
ture is displayed. The display
will flash first. Then, after a
short time, the flashing stops
and the cooking temperature is
saved.
sensor once.
sensor until
sen-
sensor until