Connecting To A Phone Line; About A Phone Cable; Using The Phone Line For Fax Only; Sharing Line With Phone Device - Epson XP-750 Grundlagenhandbuch

Basic Guide
Connecting to a Phone
Line

About a phone cable

Use a phone cable with the following interface
specification.
❏ RJ-11 Phone Line
❏ RJ-11 Telephone set connection
Depending on the area, a phone cable may be included
with the product. If so, use that cable.

Using the phone line for fax only

A
Connect a phone cable leading from a telephone
wall jack to the LINE port.
B
Make sure Auto Answer is set to On.
& "Sending Faxes" on page 15
c
Important:
If you do not connect an external telephone to the
product, make sure you turn on auto answer.
Otherwise, you cannot receive faxes.
Faxing

Sharing line with phone device

A
Connect a phone cable leading from a telephone
wall jack to the LINE port.
B
Remove the cap.
C
Connect a phone or answering machine to the
EXT. port.
Note:
See the PDF User's Guide for other connection methods.

Checking the fax connection

You can check whether the product is ready to send or
receive faxes.
A
Load A4-size plain paper in the cassette.
& "Loading Paper" on page 5
14