General Clean - SVBONY SV305 Pro Bedienungsanleitung

General Clean

Svbony SV305 Pro camera comes with an optical protection window – AR
glass, which could protect the sensor from dust and humidity. And the inside of
the image sensor is dry and sealed. We don't recommend customer to
disassemble the camera and clean it. Because disassemble the camera may
lead the sensor to get wet, or it may cause more dust to come in. If you need
clean the protection window, it is best to do it during the daytime. To see the
dust clearly, please connect the SV305 Pro camera to your telescope. Point
-05-
the telescope to a bright place, a Barlow is required to see the dust clearly.
Then adjust the exposure time in the software, make sure not over exposed.
You will see the dust showing as the following image.
1) The big spot on the image (left) are the shadows of dust on the protection
window. The Suggested way to clean them is try to blow them away with a
manual air pump.
2) The small but dark spots on the image (right) are the shadows of dust on the
sensor. The suggested way to clean it is editing the image by photography
software.
-06-