Werbung
HOW TO USE YOUR GEOSAFARI STEREOSCOPE
1. Follow the battery installation instructions to install 2 AA batteries.
2. Choose an eyepiece. There are 10x and 20x eyepieces
included. We recommend starting with the 10x eyepiece to find what
you want to inspect and then increasing to the 20x eyepiece later
to get a closer look.
3. Place the eyepiece in the microscope. The 10x eyepiece is
installed when you first open your Stereoscope.
4. Press the on/off button to turn on the LED. This will light the
object you place on the stage.
5. Place an object on the stage. We have included
12 rocks to get you started but you can inspect
anything that fits on the stage!
6. Turn the focus knob to adjust the focus.
7. When you are done, press the button to
turn off the LED.
Werbung
