Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7-INSTALLATION
Lift the column till it reaches a vertical position.
Place the two screws removed before by locking the column to the
supporting plate on the turntable.
7.7
RAMP (AW- OPTIONAL)
Tighten the connector pivots of the ramp at the base of
the pallet stretch wrapper. The ramp can be positioned at
-90°, 0° or +90° from the column.
7.8
PRELIMINARY ELECTRICAL CHECKS
Before connecting the machine to the mains please carry out the follwing operations:
7.8.1
Make sure that the sockt is provided with an earth protection circuit.
7.8.2
Make sure that both the mains voltage and frequency meet the indications of the serial numer plate.
7.8.3
Check that the connection of the machine to the main meets the rpovisions of law and/or the safety regula-
tions in your country.
Via Puecher, 22 - 22078 TURATE (CO) ITALY - Tel. 02964951 - Fax 029689727 - http://www.siat.com - Email: siat@siat.com
SIAT S.p.A.
19/44
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
