Product Description; Conditions Of Use - Greencut GD750X Serie Betriebsanleitung

58

PRODUCT DESCRIPTION

CONDITIONS OF USE

The auger is only designed to make holes in earthen floors. Do not use this machine for other not foreseen purposes.
Use this machine outdoors, in dry environments and temperatures between 5º C and 45º C. For example: do not
attempt to dig into set concrete, rock, tree roots, or other extremely hard surfaces or any other material that is not
earth. Any use other than that described above may cause dangerous situations and exempts the manufacturer from
any liability.
DETAILED DESCRIPTION OF THE PRODUCT
2
1. Spark plug
2. Handles
3. Air filter
4. Starter Cord
5. Fuel Tank
6. Tank Guard
7. Exhaust muffler
8. Starter switch
9. Diameter Auger (300mm, 200mm,
150mm, 100mm, 90mm)
10. Auger Extension
NOTE: The products detailed in this manual may vary in appearance, inclusions, description and
packaging as shown or described here.
1
3
4
5
6
9
8
7
10