Herunterladen Diese Seite drucken

Collingwood Lighting WL94 Serie Montageanleitung Seite 3

Microwave step-dim & emergency

Werbung

WL94 MICROWAVE STEP-DIM & EMERGENCY
INSTALLATION INSTRUCTIONS / CONSIGNES D'INSTALLATION / MONTAGEANLEITUNG
EN
EN
Stand-by dimming level: determines the percentage
luminaire is dimmed to during stand-by period.
Emergency pack commissioning
1. Provide an uninterrupted mains power supply
(permanent live) for 24 hours.
Permanent live must be left on for 24hrs minimum to
fully charge the battery.
2. Check the green indicator LED light is lit. This
confirms that the batteries are charging.
3. Remove the mains supply – the bulkhead will operate
under battery power for 3 hours minimum.
4. Restore mains power to the unit, check light functions
correctly.
Note: In normal operation, the green LED will be
constantly lit to indicate that the battery is charging. If
the green LED is ever not lit, investigate immediately
and rectify the fault.
Testing
Periodic testing of the unit must be performed in line
with the appropriate regulations.
Disposal of this product should be separate from
household waste. Please separate these items from
other types of waste and recycle them responsibly to
promote the sustainable reuse of material resource.
Household users should contact their local government
office for details of where and how they can take these
items for environmentally safe recycling.
t +44 (0) 1604 495 151 f +44 (0) 1604 495 095 e sales@collingwoodgroup.com w collingwoodlighting.com
EN
t +33 (0) 4 816 816 10 f +33 (0) 4 816 816 11 e ventes@collingwoodgroup.com w collingwoodlighting.com
FR
Collingwood Lighting, Brooklands House, Sywell Aerodrome, Sywell, Northampton NN6 0BT, United Kingdom
FR
naire reste allumé à l'intensité sélectionnée une fois que
la période d'éclairage maintenu s'est écoulée.
Niveau de varialion en temps de veille: c'est le pourcent-
age de variation du luminaire pendant la période de veille.
Mise en service de l'éclairage de sécurité
1. 1. Fournissez une alimentation secteur ininterrompue
(phase permanente) pendant 24 heures.
L'allumage permanent doit resté allumé pendant au
minimum 24h afin de recharger la batterie.
2. Vérifiez que le voyant LED vert est allumé. Cela
confirme que les batteries sont en charge.
3. Coupez l'alimentation secteur - le produit
fonctionnera alimenté par sa batterie pendant 3
heures minimum.
Rétablissez l'alimentation secteur, vérifiez les
fonctions d'éclairage correctement.
Remarque : En fonctionnement normal, le voyant LED
vert sera allumé en permanence pour indiquer que la
batterie est en cours de chargement. Si le voyant n'est
jamais allumé, vérifiez immédiatement et réparez la
défaillance.
Test
Des vérifications périodiques du produit doivent
être effectuées conformément aux réglementations
appropriées en cours.
Ce produit ne doit pas être éliminé avec les ordures
ménagères. Merci de le séparer des autres déchets
et de le recycler de manière responsable afin de
promouvoir la réutilisation des ressources matérielles.
Les consommateurs doivent contacter leurs autorités
locales pour plus d'information quant aux lieux et
méthodes de recyclage en accord avec la protection
de l'environnement.
DE
nach Beendigung der Haltedauer eingeschaltet bleibt.
Standby-Dimmstufe: bestimmt die Helligkeitsstufe, auf
die die Leuchte während der Standbyphase gedimmt wird.
Inbetriebnahme der Notleuchten
1. Sorgen Sie 24 Stunden lang für eine permanente
Stromversorgung (ununterbrochene Spannung).
Um die Batterie vollständig aufzuladen, muss sie
mindestens 24 Stunden lang unter Dauerstrom
stehen.
2. Stellen Sie sicher, dass die grüne LED leuchtet. Diese
bestätigt, dass die Batterien laden.
3. Trennen Sie den Netzstrom – die Einheit läuft
mindestens 3 Stunden lang mit Batteriebetrieb.
4. Stellen Sie die Stromversorgung wieder her, prüfen
Sie, dass die Leuchte korrekt funktioniert.
Hinweis: Im Normalbetrieb leuchtet die grüne LED
konstant, und zeigt an, dass die Batterie aufgeladen
wird. Sollte die grüne LED jemals nicht leuchten,
untersuchen Sie dies sofort und beheben Sie den
Fehler.
Überprüfung
Die Einheit muss gemäß den entsprechenden
Vorschriften regelmäßig überprüft werden.
Dieses Produkt darf nicht im Haushaltsmüll entsorgt
werden. Bitte trennen Sie diese Gegenstände
von anderen Abfallarten und recyceln Sie sie
verantwortungsbewusst, um die nachhaltige
Wiederverwendung von Materialressourcen zu fördern.
Privathaushalte kontaktieren bitte ihre regionalen
Ämter für Informationen darüber.
CWI 8219 V1

Werbung

loading

Diese Anleitung auch für:

Wl9410ccsWl9418ccs