Program Start; Before Commissioning - Hazet 7920 E Betriebsanleitung

NOTE!
In order to calibrate in compliance with the standard, you must connect and use a stan-
dard temperature and humidity sensor.
Caution: Not included in delivery!

1. Program start

Start the software by double-clicking on the link.
First select the language using the selection function (GERMAN / ENGLISH).
2. Master data
First, update the master data and create manufacturers, manage users and configure the filing
of the test certificates. These steps are described further in the following and in the Software
chapter.
Note: HAZET is pre-set as the manufacturer and corresponding test objects (torque wrenches)
are stored with their parameters and technical data.

Before commissioning

4
Do not reach into the device during operation!
45