Connection And Operation; General Information - PeakTech 4123 A Bedienungsanleitung

4. Connection and operation

1. Make sure, that AC power source fits the input of voltage unit
labelled (230V, 50/60 Hz) and plug it in the AC outlet.
2. Connect the equipment to the converter.
3. Connect the converter to the wall outlet and turn the equipment
ON.
4. When an operation is finished, turn off the equipment first and
then unplug the converter.

5. General Information

5.1 Cleaning the device
Only clean the device with a damp, soft cloth. Use only commercially
available detergents. When cleaning, make sure that no liquid gets
inside the interior of the device. This could lead to a short circuit or it
can cause damage to the device.
Never clean the device while it is in operation or when it is plugged
in!
9