Sony Bravia KD-75XD9405 Referenz-Anleitung Seite 17

KD-65/55XD9305 only
1
Remove the stand cover and terminal covers.
2
1
2
Remove the screws from the rear of the TV.
3
Attach the Wall-Mount Attachment (supplied with the TV) to the rear of the TV (to make it
parallel with the wall).
1.5 N∙m {15 kgf∙cm}
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to fasten the Wall-Mount Attachment when attaching them to the TV.
Use only a flat head screwdriver to install the Wall-Mount Attachment. Use of another tool might result in over
torqueing the Wall-Mount Attachment and damaging the TV.
3
VS(S)
VS(L)
GB
17
GB