Sony Bravia KD-75XD9405 Referenz-Anleitung Seite 20

3
Attach the Wall-Mount Attachment (supplied with the TV) to the rear of the TV (to make it
parallel with the wall).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to fasten the Wall-Mount Attachment when attaching them to the TV.
Use only a flat head screwdriver to install the Wall-Mount Attachment. Use of another tool might result in over
torqueing the Wall-Mount Attachment and damaging the TV.
4
Detach the Table-Top Stand from the TV.
5
Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
20
GB
VS
1.5 N∙m {15 kgf∙cm}
Wall-Mount Bracket
(not supplied)
Screw (not supplied)