Samsung 9 Serie Bedienungsanleitung Seite 23

■ 3D Mode: Select the 3D input format.
✎
If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select
3D Mode from the list as below.
✎
When watching 3D images, turn on 3D Active
Glasses
3D Mode Operation
Off Turns the 3D function off.
2D → 3D
Changes a 2D image to 3D.
Displays two images next to
Side by Side
each other.
Displays one image above
Top & Bottom
another.
Displays the images for the left
Line by Line
and right eye alternately in rows.
Displays the images for the
Vertical Stripe left and right eye alternately in
columns.
Displays the images for the
Checker
left and right eye alternately in
Board
pixels.
Displays the images for the
Frequency left and right eye alternately in
frames.
✎
"Side by Side" and "Top & Bottom" are available
when the resolution is 720p, 1080i and 1080p
in DTV, HDMI and USB mode or set to PC
connecting through HDMI/DVI cable.
✎
"Vertical Strip", "Line by Line" and "Checker
Board" are available when the source is set to PC
connecting through HDMI/DVI cable.
✎
"Frequency" displays the frequency (60Hz only)
when the source is set to PC.
3D → 2D (Off / On): Displays the image for the left eye only.
■
✎
This function is deactivated when 3D Mode set to
"2D → 3D" or Off.
■ 3D View Point: The overall adjustment of 3D
perspective.
✎
This function is deactivated when 3D Mode set to
"2D → 3D" or Off.
■ Depth: Adjusts focus / depth in "2D → 3D" mode.
✎
This function is only activated when the 3D Mode
is "2D → 3D".
■ Picture Correction: Adjusts the images for the left and
right eye.
■ 3D Auto View (Off / On): If 3D Auto View is set to On,
a "Side by Side" format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the Standard
HDMI 3D Format.
✎
If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a
3D Mode using the
menu.
✎
Support resolution (16:9 only)
Resolution
1280 x 720p
1920 x 1080i
1920 x 1080p
■ 3D Optimisation: The overall adjustment of 3D effect.
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to
1920 x 1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
How to watch the 3D image
3D
To watch in 3D, wear 3D glasses and
press the power button on the glasses.
Viewing 3D TV motion pictures for long
periods may cause eye fatigue and/or
dizziness.
OK
L Move E Enter e Exit
3D 3D
Using the LEFT / RIGHT keys on the remote control, Using the LEFT / RIGHT keys on the remote control,
select the icon suitable for the picture on screen. select the icon suitable for the picture on screen.
L Move E Enter e Exit L Move E Enter e Exit
3D button or corresponding
Frequency (Hz)
50 / 60 Hz
50 / 60 Hz
24 / 30 / 50 / 60 Hz
Cancel
23
English