Handlebar:
•
Unfasten the locking knob of the handlebar and remove the protective cover of the tube.
•
Loosen the screw of the wedge at the quill of the extension tube.
•
Insert the extension tube into the fork.
•
Pivot the handlebar that it stands vertical on the fork.
•
Use the locking knob to locate the position of the handlebar.
•
To adjust the handlebar to the desired height release the lever of the clamp and fasten it again after the
adjustment.
P2007 Jens Broecking © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
250-070