General Information; Warranty Notes - AirCom G Serie Betriebsanleitung

General information

High pressure filters G Series (w ith threaded connection) are used for separating
solids, oil and w ater from uncritical and inert gases of fluid group 2. They can be
used as single filters or as a filter combination.
Notes on these operating instructions
These operating instructions contain all necessary information for the safe and
economic use of the G filters of WS, V, ZP, XP, XP4, KT and A, singularly or
combined.
These instructions are compiled for competent installers and fitters. It is assumed
that they have an adequate know ledge of good practice in installing components
in a compressed and inert gas system.
Characters and symbols used
► Work steps that you have to carry out one after the other are marked w ith a
triangle.
Lists are marked by a s mall box.
Warning!
These safety notes w arn against dam age to m achines or equipment and
help you to avoid such dam age.
Danger!
These danger notes w ith a grey background w arn against personal injury
and/or danger to life and lim b; danger notes help you to avoid dangerous
or life-threatening situations for yourself and/or third parties.

Warranty notes

In the follow ing cases, the w arranty shall be void:
If the filter is not used in accordance w ith its intended use.
If the filter is not serviced as speci f ied in these operating instructions.
If other than original spare parts are used.
Notes on the European Pressure Equipment Directive (PED) 97/23/EC
In accordance w ith the European directive 97/23/EC, pressure-controlled media
are classified into tw o fluid groups depending on their hazard potential: Fluid
group 1 comprises primarily flammable, explosive, or toxic media; fluid group 2
comprises non-critical and inert media such as compressed air, helium, or nitro-
gen. Below you w ill find a summary description of the marking and identification
requirement according to 97/23/EC:
G2-14_25-50bar_DE-EN_1
English
17