Interconnection Examples - Hifonics Medusa Serie Benutzerhandbuch

In the „TIME ALIGNMENT" section you have the possibility to calculate
16
the run-time correction of the individual channels by M-CONTROL 2,
to optimally align the sound system and the DSP device to the acoustic
stage center. To do this, follow these steps:
• First measure the distance of all loudspeakers of the sound system
to the acoustic stage center (for example, the driver's seat at the ear
level of the driver).
• Then enter the measured distance values under „TIME ALIGN-
MENT" for each channel in the corresponding input field in centime-
ters (CM).
• When you have entered all the distance values, press "DelayCalc".
M-CONTROL 2 then calculates the appropriate parameters and
transfers them automatically to the respective channel from A to H.
Then you can fine-tune the channel sections with the "Delay" slider.
• With "Reset" you can reset all values.
• With the loudspeaker symbol in each channel you can mute the
respective channel.
Under „REMOTE SETTING" you are able to select, with which channel
17
pair (EF Channel or GH Channel) you want to control the bass level with
the connected remote controller. Therefore, always select the channel
pair, on which you have connected the subwoofer.
26
FUNCTIONAL INSTRUCTIONS
16
17