Werbung
Verfügbare Sprachen
Verfügbare Sprachen
O P E R A T I N G I N S T R U C T I O N S
Bluetooth
USB Stick 3.0+EDR
®
Item-No. 97 54 62
Intended Use
The Bluetooth
®
USB stick is intended to be connected to a USB port of a computer to provide
radio connection with other suitable Bluetooth
This product complies with the applicable National and European requirements. All names of
companies and products are the trademarks of the respective owner. All rights reserved.
Package Contents
• Bluetooth
®
stick
• CD with driver/software and the manufacturer's manual (PDF format)
• Operating Instructions
Features
• Small design
• USB connection, USB2.0
• Class II, Bluetooth
®
3.0 EDR, 10m maximum range (free-field)
Installation of Bluetooth
Driver/Software
®
Do not insert the Bluetooth
The supplied software has to be installed first. Following a different sequence
can prevent the Bluetooth
the software not to function correctly.
If you only want to use the Bluetooth
the installation of the Bluetooth
Instead, it will be necessary to install the driver for the PS/3 controller, see chapter
"Installation of a PS/3 Controller".
To install the Bluetooth
USB stick proceed as follows:
®
• Insert the CD with the Bluetooth® software/driver into an appropriate drive on your computer.
If the installation software does not start automatically, it must be started manually in the main
directory of the CD (e.g. "Autorun.exe").
• Follow the program's instructions.
Installing the driver can take some minutes. Please wait, until the drivers are fully
installed, do not abort the installation program, even if, at first sight, it looks as if the
program is not responding anymore.
• Only connect the Bluetooth
®
USB stick to the computer when the installation has finished (or
when the software asks you to do so). Windows recognises the new hardware and completes
the installation.
• It might be necessary to restart Windows afterwards.
• The software can be used to search for available Bluetooth
Installing a PS/3 Controller
At the time of writing these operating instructions, the software did not sup-
port 64-bit operating systems. Follow further information, consult the text files
on the CD, if necessary.
Installing the "normal" driver/software for the Bluetooth
necessary, when using with a PS/3 controller!
Installing the driver for the PS/3 controller is sufficient. Please note, that the
Bluetooth
®
USB stick can only be used for either a PS/3 controller or for traditional
Bluetooth
®
devices!
The CD contains detailed step-by-step instructions (in English) with numerous illus-
tration for how to install the software when using a PS/3 controller.
Connect the Bluetooth
®
USB stick with the PC and wait until Windows has completed the hard-
ware detection.
Start the software installation process for the PS/3 software and follow all of the instructions. The
.NET-Framework2.0 might have to be installed, depending on the operating system used. The
software does this automatically, if an active internet connection is present; otherwise, you need
to download the .NET-Framework2.0 from the Internet page www.microsoft.com and install it.
Afterwards, the installation of the for the Bluetooth
Depending on the internet connection, download and installation might take a few minutes.
www.conrad.com
Version 03/11
®
devices.
USB stick yet!
®
stick from being recognized correctly, or can cause
®
®
stick as a receiver for a PS/3 controller, then
®
driver/software is not necessary.
®
devices, e.g. a mobile phone.
®
USB stick (see above) is not
®
USB stick software must be re-started).
After completing the installation, you will find the item "PPJoy Joystick Driver" in the menu "Start
/ Programme". Start "Configure Joysticks".
Click on "Add" and at "Parallel Port", select the "Virtual joysticks" setting. Then click on "Add"
and "Done". After this, Windows will recognize the new hardware, follow all of the instructions.
Finally, from "Start / Programs / PXConnector", start the programme "PS3 Controller Configuration
°
Tool".
Please connect the PS/3 controller via an appropriate cable with a free USB port from your com-
puter when requested by the program. The software now performs a pairing (linking the PS/3
controller to the Bluetooth
If the software asks, disconnect the USB connection to the PS/3 controller and press the "PS"
button on the controller for at least 1 second.
The PS/3 controller is then available e.g. for games.
Newer versions of the software may have different procedures. In this case, please
consult the appropriate instructions on the CD.
Tips & Notes
• USB does not function when DOS or Windows are in safe mode (or only restricted to USB key-
board/mouse). The Bluetooth
• The stated range of up to 10m is the free-field range, i.e. the range with sight contact between
the transmitter and the receiver (one Bluetooth
however, there are walls, room ceilings, metal objects etc. between the transmitter and the
receiver, which reduces the range accordingly.
Other causes for a reduction in range are:
- High-frequency interference of all types (computers, monitors, mobile phones)
- Any kind of housing and vegetation
- Conductive metals, in the vicinity of the units, or within or close to the radio path, e.g. radia-
tors, metal insulation, glass windows, reinforced concrete floors etc.
- Influences on the aerial's transmission characteristics, due to the distance of the transmitter or
receiver from conductive areas or objects (including the human body or floor).
- Broadband interference in urban areas that reduces the signal-to-noise ratio; the signal is not
recognised because of the "noise"
- Irradiation from insufficiently shielded electronic devices, e.g. computers operated openly, or
similar.
• The max. data transfer rate decreases with increasing distance. However, you should not posi-
tion another Bluetooth
distance of at least 30 cm.
Declaration of Conformity (DOC)
We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this pro-
duct conforms to the fundamental requirements and the other relevant regulations of the directive
1999/5/EC.
You can find the Declaration of Conformity for this product at www.conrad.com.
Disposal
Electrical and electronic products do not belong in the household waste!!
Please dispose of the device when it is no longer of use, according to the current
statutory requirements.
© Copyright 2011 by Conrad Electronic SE.
®
USB stick or the software).
®
USB stick does not work in this mode.
®
device to another). In practical operation,
®
device in the direct proximity of the Bluetooth
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or
the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
®
USB stick, maintain a
Werbung
